Recruitment metrics for high-volume hiring

The recruitment metrics that matter most in high-volume hiring are time to first contact, time to a booked interview, interview attendance, starts by source and cost per start. Together they show where applicants drop out and where your money works. Onrolo records hiring as it happens, so the numbers are there without a spreadsheet.

Last updated 18 November 2026. Written by Onrolo.

What are recruitment metrics?

Recruitment metrics are the numbers that describe how your hiring is going: how many people apply, how quickly you reach them, how many move through each step, how many start, and what it costs. A recruitment KPI is a metric you have set a target for.

Also called hiring metrics or recruitment KPIs.

When you hire a few people a year, the numbers matter less than each decision. When you hire by the dozen or the hundred, small leaks at each step add up, and the metrics are how you find them.

Which recruitment metrics matter for high-volume hiring?

Start with these. Each one is simple to calculate and tells you something you can act on.

MetricHow to calculate itWhat it tells you
Applications by sourceApplications from each advert, job board or referral, per weekWhere your applicants come from
Time to first contactTime from an application arriving to your first message to the applicantWhether you reach people before another employer does
Screening completion rateScreenings completed ÷ screening invites sentWhether applicants engage, and whether your screening is too long
Pass rateApplicants who pass screening ÷ applicants screenedWhether your adverts attract the right people, and whether your pass mark is set sensibly
Time to a booked interviewTime from application to an interview in the diaryWhere applicants drift away while they wait
Interview attendance rateInterviews attended ÷ interviews bookedWhether confirmations and reminders are working
Offer acceptance rateOffers accepted ÷ offers madeWhether your pay, hours or process are losing people at the last step
Start ratePeople who start ÷ offers acceptedHow many accepted offers turn into a first day
Starts by sourcePeople who start, grouped by where they appliedWhich sources bring people who actually start, so spend can follow
Cost per startTotal hiring cost in a period ÷ people who started in itWhat each starter really costs, including those who never turn up
Early leaversStarters who leave within a set number of weeks ÷ all startersWhether you're hiring people who stay

What is the difference between time to hire and time to fill?

Both measure speed, from different starting points. Time to hire starts when the candidate applies. Time to fill starts when the job opens.

  • Time to hire: days from a candidate applying to that candidate accepting an offer. It measures how fast your process moves once someone is interested.
  • Time to fill: days from the job being opened (or approved) to an offer being accepted. It includes the time spent waiting for the right applicant.

For example, if a job opens on 2 March, the person you hire applies on 9 March and accepts on 12 March, time to fill is 10 days and time to hire is 3 days.

In high-volume hiring, time to hire is usually the more useful of the two, and it's worth splitting it into its parts: time to first contact, time to a booked interview and time from interview to offer. Use the median rather than the average, so a few slow cases don't hide what usually happens.

How do you calculate cost per hire?

Add up everything you spent on hiring in a period and divide it by the number of people hired in that period.

  • External costs: job adverts and job boards, agency fees, assessment tools and events.
  • Internal costs: recruiters' and managers' time spent on hiring, recruitment software, and referral bonuses.

Many high-volume teams track cost per start instead of cost per hire, because someone who accepts an offer and never turns up costs just as much to find. Whichever you choose, use the same costs and the same period every time, or the trend means nothing.

How do you read a recruitment funnel?

A recruitment funnel counts how many people reach each step in a period. Reading it is how you find the step that loses the most people.

  1. Count each step. Applied, invited to screening, screened, passed, booked, attended, offered, accepted, started.
  2. Work out the conversion between each pair. Screened ÷ invited, passed ÷ screened, booked ÷ passed, and so on.
  3. Find the biggest drop. That's the step to fix first. It's rarely the one you expect.
  4. Change one thing and watch it. For example, shorten the screening, offer earlier interview slots or add a text reminder, then compare the same conversion a few weeks later.
  5. Split it when you need to. By site, intake, season or source, so one location's problem doesn't hide inside the average.

How often should you review recruitment metrics?

Weekly, when you hire at volume. A monthly review is too slow: by the time you see a drop, a whole intake has gone through it.

  • Look at the same few numbers every week, in the same order.
  • Compare with the same period last year when hiring is seasonal, not just last week.
  • Give each site, intake or season its own view, so peaks don't blur the rest of the year.
  • Agree what each number means and write it down, so nobody changes the definition quietly.

Which recruitment metrics are easy to get wrong?

  • Counting hires, not starts. An accepted offer is not a starter. In shift-based work, the gap between the two can be large.
  • Attendance marked late. If attendance isn't marked on the day, the attendance rate is guesswork, and no-shows don't get followed up.
  • Averages hiding the usual case. One applicant who took six weeks can double an average. The median is more honest.
  • Counting the same person twice. Someone who applies for three jobs is one applicant, not three, when you measure reach.
  • Changing definitions. If time to hire ends at offer one month and at start the next, the trend is meaningless.
  • Borrowed benchmarks. A figure from a different industry, country or type of role tells you little about yours. Your own trend is the best benchmark.

How does Onrolo track recruitment metrics?

Onrolo records every application, screening, booking and stage move as it happens, so your recruitment numbers are current without anyone rebuilding a spreadsheet.

  • By site, intake or season: give each its own pipeline, then see applicants, screenings, bookings and starts for one or all of them.
  • Attendance: comes from the register your team marks on the day, in the web app or the iPhone and Android app.
  • Export: build a report from your own data and export it to CSV or Excel.

Two in three booked candidates have an interview in the diary within 24 hours of applying.

Questions about recruitment metrics

What are the KPIs for recruitment?

For high-volume hiring, the most useful are time to first contact, time to a booked interview, interview attendance rate, offer acceptance rate, starts by source and cost per start. A metric becomes a KPI once you set a target for it.

What are some examples of recruitment metrics?

Applications by source, screening completion rate, pass rate, time to hire, time to fill, interview attendance rate, offer acceptance rate, start rate, cost per hire and early leavers.

What is the difference between time to hire and time to fill?

Time to hire runs from a candidate applying to that candidate accepting an offer. Time to fill runs from the job being opened to an offer being accepted, so it includes the time spent waiting for the right applicant.

How do you calculate cost per hire?

Add up your hiring costs in a period, including adverts, agency fees, software and recruiters' time, and divide by the number of people hired in that period. High-volume teams often use cost per start instead, because a hire who never starts costs just as much to find.

What is a good time to hire?

There is no single good number: it depends on the role, the sector and the season. In high-volume hiring, compare your own time to hire week by week, and look first at the time to first contact and the time to a booked interview, because those are the parts you can speed up most directly.

What is quality of hire?

Quality of hire is a measure of how good your new starters turn out to be. Simple versions use the share of starters still in post after a set number of weeks, or a manager's rating at the end of probation.

See your hiring numbers counted for you

Send us an advert for one of your roles and your logo. We'll set up a pipeline with example candidates and show you the journey and an export, the way your team would see them on Monday morning.

Nothing to sign. We reply within one working day.